Health knowledge made personal
Join this community!
› Share page:
Go
Search posts:

When Technology Fails: Make Your Own Shoes

Posted Feb 08 2013 8:00am

The latest installment in our series of projects for the hardcore DIYer is a great idea for the post-apocalyptic future…but also a challenging and fun craft for any era!

Matthew Stein’s book, When Technology Fails: A Manual for Self-Reliance, Sustainability, and Surviving the Long Emergency , offers this quick guide to making your own shoes. The book is packed with useful tips for saving money, living a sustainable lifestyle, and surviving in a savage, Road Warrior-like dystopia.

We hope that will never happen, but if it does, at least your toes will be stylin’ and safe.

Have you made your own shoes? If you do, share a picture with us! Visit and join the conversation. We’d love to hear from you.

The following article was adapted for the web from When Technology Fails: A Manual for Self-Reliance, Sustainability, and Surviving the Long Emergency .

In pioneering days, a good-fitting pair of shoes was a truly valuable possession. Often, when shoemakers passed through a village, they would make several pairs of shoes for each person who could afford them, as it might be years before they had the opportunity to purchase another pair of good-fitting shoes. Making your own traditional boots is not easy, but sandals and moccasins are easy and rewarding leathercraft projects for the beginner.

Soles can be attached with stitching, primitive hide glues, more modern glues such as Barge Cement, or nailed in place (cobbling). McNett Corporation makes an excellent urethane shoe-repair cement, called Freesole, which can be used to repair holes in shoes and worn soles or glue new soles in place. Freesole is available through backcountry suppliers and shoe-repair shops. It is reportedly much stronger than Barge Cement and withstands much higher temperatures, but I have not tried it yet for gluing soles in place. See Chapter 14 for instructions on how to make your own glues.

Sinews, heavy waxed nylon thread, or multistrand wire are all good, strong materials for stitching together footwear. If you scavenge wire for thread, make sure that the strands are fine or else constant flexing will cause the metal to fatigue and the wire to break. Shoe soles and straps can be nailed together by a process called “cobbling.” Shoe soles that were attached by simply nailing short nails through the soles into the midsole would soon work loose and fall off. Traditional cobblers use nails with slender, tapering tips that are nailed through the straps and soles against a metal anvil, bending the nail tips backward so that they form a hook shape. By bending the nail tips, the sole or strap is captured in such a way that the nails can’t easily work their way back out.

Use the pattern shown in Figure 10-27 as a rough guide. Start by tracing the outline of your foot on a piece of paper. Add about 3/8 inch to the front and sides, but not the heel area. Make two marks at the centers of your anklebones (A) and a mark at the side of the ball of your foot, directly behind your big toe (B). Draw lines through these points, as shown in the pattern, to help you locate the strap loops. The strap loops are designed for 3/4-inch-wide webbing. If you use a different size of strap material, adjust and customize your pattern as necessary to fit your foot. Cut out your pattern as you would a paper doll, and lay it on the tire to mark the outline for cutting the rubber (Elpel 1999, 134).


1. Elpel, Thomas J. Participating in Nature: Thomas J. Elpel’s Guide to
Primitive Living Skills
. Pony, MT: HOPS Press, 1999.

Post a comment
Write a comment:

Related Searches