When purchasing a heart rate monitor you must be knowledgeable of the workout level your heart can sustain. You cannot go purchase a heart rate monitor and just start using it for workouts.
In order to determine that, the first thing you have to do is calculate what your maximum heart rate, also known as MRH, and the desired targeted heart rate. This is done by following using a formula and the first thing you need to have is the difference between the number 220 and your actual age. The result is then converted into a percentage that represents the lower part of the range. After that you multiply the result with another number to get the higher percentage. Those two results are then the heart rate you should have during your training.
For example, this can be illustrated using a 25 year old person. The difference between 220 and 25 is 195. The number 195 is then multiplied by 65%, and the result would be would be 26.75, or rounded off to 127. If you multiply 195 again, but this time with 80%, then you would arrive at 156. This means that the desired heart rate during a training session must be anywhere from 127 to 156 beats each minute.
In regards to the percentages, not just any random number is chosen. These percentages used are based upon training boundaries. The first range of 50% – 60% is to maintain a healthy heart and is what can be considered good for daily exercises. The second range of 60% – 70% is for aerobics or for fat burning, and the 70% – 80% range is considered necessary for any endurance training. Finally, the 80 – 90% range, also known as the anaerobic threshold zone, is used to greatly improve cardiovascular fitness.
It is now time to wear your heart rate monitor, since your targeted heart rate has been determined. To make it fit tightly where it comes into contact with your skin, dampen the back of the transmitter and without taking deep breaths adjust it. The monitor, on women, has been found to be more comfortable when worn under the bra or breasts.
After that, start the monitor and then adjust accordingly if the readings a rather abnormal. If you get hyper readings or dead readings right after putting it on, relocate it to a better position. It would also be a good idea to have lots of space around as heart rate monitors have a tendency to pick up other’s transmitters.
A heart rate monitor also requires that it be taken care of properly. Most of these devices are water resistant, but nonetheless they should be placed in dry places with enough room around them. They can be cleaned with warm water and soap and then dried of with a soft towel. No alcohol should be used and batteries need to be replaced every now and then.
The right heart rate calculations, proper use and right care will let you keep your heart rate monitor for a long time so that it can accompany you on many great workouts. By working out and using the right tools you will be able to achieve a healthy heart and heart healthy lifestyle. For a wide selection of quality , stop by Bodytronics for good advice on .