On basis of many times experiments and improvement, introducing the latest mechanical techniques of the same products, Hyper Pressure V Type Grinder is the latest industrial micro-powder grinding mill , also a new type grinding machine for producing micro-powder.
Hyper Pressure V Typegrinding millsis elaborately designed by our grinder engineers through the customer's production requirement and actual using experience, and also is a kind of new type high performance grinding equipment. Comparing with the traditionalRaymond milland high pressure suspension grinder, it has many advantages. It is widely used in glass, rubber, pesticide, porcelain enamel, paint, phosphate fertilizer and paper making, etc chemical industry. And it is used for grinding the Moh's hardness is below 9.3; humidity is 6% and non-flammable, non-explosive materials like talcum, barite, calcite, limestone, manganese ore, iron ore, ore, quartz, gypsum, betonies, etc.
After reducing driving force of the main motor by the gear reducer, when the drive center axis and the quincunx rack fixed on the center axis revolve, under the centrifugal force the roller revolves around the center axis, at the same time parallel swing around the shaft, making the roller compress out side to the ring, thus ensure that the roller and ring has maximum surface contace. At the same time the roller self revolves around the roller shaft, making the material scooped up by the shovel blade to grind, after grinding the powder blew to upper part of the mainframe, the separating by the separator, too coarse powder drops to the grinding room to re-grind, the qualified powder airflows into the cyclone powder collector, through the discharging pipe is qualified product.
Roller Assembly of the Hyper-pressure V typegrinding millis composed of roller sleeve, roller shaft, roller shaft and bearing. Roller sleeve is double tube structure: through the upper and lower two bearing the right tube installs roller shaft and roller, the left tube installs the shaft of roller, the two ends are vertically fixed on the upper part and the lower part of the quincunx rack.