Health knowledge made personal
Join this community!
› Share page:
Go
Search posts:

Resin casting

Posted Jul 21 2009 10:33pm
Tackle It Tuesday Meme
Try This Tuesday







You will need:-
Bottle of resin
Catalyst
Mould Release spray
A piece of felt the same size as the bottom of your mould
Interesting thingummy bob
Disposable bowl for stirring
Popiscle stick for stirring
Disposable mould or something you already have but don’t mind sacrificing to art
Waste paper / drop cloth to protect surfaces

1.Read the instructions carefully and conduct the whole exercise is an open air space due to the fumes unless you wish to get high whilst supervising a children’s activity?

2.Check that the interesting thingy fits in your mould without touching the edges or bottom or poking out the top. [this is a great exercise in spatial awareness in and of itself as you have to imagine the thingummy bob in 3D floating in your chosen mould]

3.Spray the mould with mould release and leave to dry. Repeat.

4.Make up a small quantity of resin according to the manufacturer’s instructions in a disposable mixing bowl and add the catalyst. This will make the first layer so that the thingummy doesn’t poke through. Remember that you are actually making the cast upside down whereby the first layer you pour, is really the top.
5.Stir thoroughly without creating bubbles.
6.Pour into the mould and leave to harden.
7.Cover with a cloth so that foreign objects, dust or the occasional fly doesn’t accidentally become embedded.
8.Once dry place your object on the now hardened first layer.
9.Repeat the layers until the object is completely covered.
10.Leave to harden preferably overnight.
11.Cut a piece of felt to fit the bottom of the ‘paper weight’ and glue on securely.

Warning:- take care to explain to the children…… whatever they want to commit to a cast is for a life sentence, non-returnable nor returnable.






If you like what you read, send it to someone in 'need.'
Post a comment
Write a comment:

Related Searches